The 101 On Owning And Maintaining A Tankless Water Heater

As a homeowner, you most likely understand the importance of regular maintenance and repairs. From cleaning your exterior siding to replacing a broken roofing shingle, these tasks are necessary for your home's function, appeal, and value. Unfortunately, you may not be placing enough time and energy into your water heater. Considering the average lifespan of a traditional water heater is 10 years, you may need a replacement while living in your house. Thankfully, opting for a tankless model is a smart investment.

Tankless water heaters may cost a bit more than the typical model, but they offer incredible benefits for your home and family. Using this guide, you will understand the reasons to go tankless and learn the best techniques to protect your investment.

Tankless 101

Traditional water heaters require a constant supply of energy to heat water, even when it is not in use. This constant source of energy is not only wasteful, but it also reduces the amount of hot water your home can use. For households with large families, the loss of hot water for washing dishes, clothes, and bathing can be problematic.

While surprising to hear, tankless water heaters only require energy when the hot water is turned on, so you will see a reduction in your monthly energy bills. Also known as demand water heaters, tankless models are 24 to 34 percent more energy efficient in households that use 41 gallons or less of hot water each day.

Investing in a tankless water heater is smart for your home, but proper maintenance is imperative for protecting this eco-friendly, valuable update.

Tankless Maintenance

To ensure your new water heater remains functional and energy efficient, flushing the lines may be necessary every few years.

Before beginning the process, turn off the power to your tankless water heater. If your home is using a gas powered tankless model, turn off the main gas valve.

Locate and close off these 3 valves to prevent the flow of water during the maintenance process:

  • Main Valve – This is the valve responsible for allowing running water into your home.
  • Blue Valve – The blue value allows cold water into your home.
  • Red Valve – The red valve allows hot water into your home.

Remove the caps on the blue and red valves, releasing pressure inside the water lines. Be sure all seals remain in place to ensure a secure connection while flushing out the water lines. Connect hosing to all 3 valves, but be sure the length of the hosing reaches a 5-gallon bucket for water on the ground.

To rinse away dirt, mold, sediment, and other minerals from your water heater's lines, use vinegar. Vinegar contains acidic properties that are naturally antibacterial and antiviral, which make it a safe, effective option for flushing out your tankless water heater. Fill the 5-gallon bucket with vinegar and place a sump pump inside. Connect the hosing lines to the sump pump and open the valves to begin flushing out your water heater.

Allow your sump pump to run 45 minutes to an hour, flushing out all dirt, mineral deposits, and other debris. After the time, remove the sump pump and close the valves. Empty the bucket and place back on the ground. Turn on the valves to run regular water through the water heater and connected hosing. This will rinse leftover dirt, sediments, and vinegar into the bucket.

After flushing the water heater, remove the hosing and bucket. Turn on the power or gas supply when the flushing process is complete.

Installing a tankless water heater may seem like an overwhelming expense. However, understanding and proper maintenance will ensure your tankless model is energy efficient for many years to come. For more information, visit sites like

About Me

Exploring Drywall Mudding Tools and Practices

Hello, I am Rob Hessile. I am going to teach you all of the finer nuances of drywall mudding on my website. The mudding process creates the seamless walls you see around you. Without mud, the walls would show all of the individual drywall sheets that surround each room. You can really tell a good mud job from a bad one by looking closely at the estimated seam location. With the right tools and techniques, it is possible to make that seam completely invisible. I hope you will follow along with my website and learn all you can about mudding tools and practices. You can use the information to blend drywall panels together with ease. Thanks for stopping by. Come back again soon.