If you recently upgraded from a standard refrigerator to one that has an ice maker and water dispenser, you may still need to get the water hooked up to it. And you may be able to do it yourself; here are some tips that could help you get the water and ice up and running in your new appliance.
Step 1: Look For Water Line
If you are lucky, you will find a water line sitting on the floor behind your refrigerator. This line will typically be a 1/4-inch copper tubing pipe, but there is also a chance it might be plastic. If there is a line there, it comes from a cold water pipe and is fresh water. You can attach to this tube to your refrigerator, and your job will be complete.
Before attaching, you may want to clean out the line first though. If the line had not been used for a long time, it might contain dirt, debris, and minerals. When you turn it on, have a large bucket ready to catch the water. Next, look for a valve near the area where the tube is located. This valve should turn the water on. After you turn it on, let it run for a while so the line can get cleaned out before you hook it up to your refrigerator.
Step 2: Install A Water Line
If you are not fortunate enough to find a water line waiting for you to use, you may want to hire a company that offers home appliance repair to install one for you, like Appliance Service Co Inc.. Installing a water line is not an easy task for someone not used to working on plumbing projects, and it will be much easier to hire this out.
The repair technician will install the line by locating the nearest cold water pipe. If you have a basement under your kitchen, he or she may look there to find a pipe. If there is a pipe under the kitchen, the repair technician could easily use this pipe for adding the line. He or she will then run a new pipe up to your kitchen.
From there, the technician will install a shut-off valve and connect the 1/4-inch copper tubing. Once this is complete, he or she will hook the tubing to the back of the refrigerator and will turn the water on.
Step 3: Treat The Water
After the water is hooked up to the refrigerator, you can begin using it. It will take several hours, or more, for the appliance to make ice, but you will have water right away. Once it is working, you may want to taste the water to see if it is good. Most refrigerators have filtering systems in them that treat the water, but these are not always sufficient for treating hard water.
If your water doesn't taste well, you could consider getting a water filtration system of some kind. If you do this, you will have to make sure the filtering system is placed in your water system somewhere before the pipe that leads to your refrigerator.
For example, some people purchase filtration systems that are placed under their kitchen sinks. This type would not be helpful for treating your refrigerator water though. You may need to get a whole house filtration system for this purpose. An appliance repair company will probably be able to hook up a water filtration system for you too.
If you need some help hooking up the water in your refrigerator, contact a company that offers home appliance repair. They can assist you with repairs for any appliance you own, and this is the simplest way to get repairs made.